Rubber Rheometer

Giá bán: Call

Mã sản phẩm: VR-3110

Thương hiệu: Ueshima

Bảo hành: 12 months

Flat Die Rheometer (FDR) VR 3110 JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter) FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd., 加硫試験機

FDR(Flat Die Rheometer)
Model: VR-3110

Shape of Die: No friction flat sealed cavity(JIS K 6300-2, ISO 6502, ASTM D 5289 compliant)
Pressurizing  Method: Pneumatic Cylinder (Oil-less type) Cylinder Inner Diameter: 160mm
Oscillation Drive Method: Sinusoidal Vibration Mechanism by Conical Rotational Motion “Cone Drive”
Oscillation Drive Motor: Synchronous  Motor 25W AC
Oscillation Transmitting Method: Elastic Connection  by Leaf Spring
Frequency: 1.67Hz (100cpm)
Oscillation Angle: ±1°
Oscillation Angle Accuracy: 2±0.03°(Without Load)
Torque Detecting Method: Strain Gauge Type Load Cell
Torque Transmission  Method: Elastic Connection  by Leaf Spring
Testing Temperature Range: 50 to 230° C
Temperature Control Accuracy: Die Temperature: ±0.3° C at 190° C
Internal and External  Die Temperature Difference:  ±1.0° C at 190° C

Heat Control Method: Independent PID Control on four pieces  of Film Heaters  (Upper / Lower Die, Upper Outer / Lower Outer Die)
Temperature Sensor: Platinum Resistance  Sensor (Pt100) 4pcs
Maximum Testing  Time: 9999minutes
Shield Cover: Colored Acrylic  on Front and Sides  (Preventing external air and for Safety)
Safety Equipment : (1)   Two-hand Press Start Switch (Cylinder lifts only when both buttons are pressed simultaneously.), (2)   Overload Protection  (more than 22N・m), (3)   Overheat Protection  (Heater will be turned off at 240° C or higher.)
Communications: RS232C
Utilities: (1)   Power Source  AC100V/220V,  Single Phase,  Power Consumption less than 700VA, (2)   Dry Air 0.343 to 0.686MPa
Environmental Conditions: (1)   Temperature   5 to 40° C,  (2)   Humidity  35 to 80%RH (No Dew Condensation)
Dimensions  and Weight: Approx.333(W)×520(D)×780(H)mm, Approx.110kg
Standard Items: (1)   Equipment main unit: 1 set, (2)   Accessories 1set (Software, Special Tool, Minimum Consumable  Parts etc.)

FDR(Flat Die Rheometer)
Model: VR-3110

Shape of Die: No friction flat sealed cavity(JIS K 6300-2, ISO 6502, ASTM D 5289 compliant)
Pressurizing  Method: Pneumatic Cylinder (Oil-less type) Cylinder Inner Diameter: 160mm
Oscillation Drive Method: Sinusoidal Vibration Mechanism by Conical Rotational Motion “Cone Drive”
Oscillation Drive Motor: Synchronous  Motor 25W AC
Oscillation Transmitting Method: Elastic Connection  by Leaf Spring
Frequency: 1.67Hz (100cpm)
Oscillation Angle: ±1°
Oscillation Angle Accuracy: 2±0.03°(Without Load)
Torque Detecting Method: Strain Gauge Type Load Cell
Torque Transmission  Method: Elastic Connection  by Leaf Spring
Testing Temperature Range: 50 to 230° C
Temperature Control Accuracy: Die Temperature: ±0.3° C at 190° C
Internal and External  Die Temperature Difference:  ±1.0° C at 190° C

Heat Control Method: Independent PID Control on four pieces  of Film Heaters  (Upper / Lower Die, Upper Outer / Lower Outer Die)
Temperature Sensor: Platinum Resistance  Sensor (Pt100) 4pcs
Maximum Testing  Time: 9999minutes
Shield Cover: Colored Acrylic  on Front and Sides  (Preventing external air and for Safety)
Safety Equipment : (1)   Two-hand Press Start Switch (Cylinder lifts only when both buttons are pressed simultaneously.), (2)   Overload Protection  (more than 22N・m), (3)   Overheat Protection  (Heater will be turned off at 240° C or higher.)
Communications: RS232C
Utilities: (1)   Power Source  AC100V/220V,  Single Phase,  Power Consumption less than 700VA, (2)   Dry Air 0.343 to 0.686MPa
Environmental Conditions: (1)   Temperature   5 to 40° C,  (2)   Humidity  35 to 80%RH (No Dew Condensation)
Dimensions  and Weight: Approx.333(W)×520(D)×780(H)mm, Approx.110kg
Standard Items: (1)   Equipment main unit: 1 set, (2)   Accessories 1set (Software, Special Tool, Minimum Consumable  Parts etc.)

Nội dung chi tiết video sản phẩm đang được cập nhật...

FDR(Flat Die Rheometer)
Model: VR-3110

Shape of Die: No friction flat sealed cavity(JIS K 6300-2, ISO 6502, ASTM D 5289 compliant)
Pressurizing  Method: Pneumatic Cylinder (Oil-less type) Cylinder Inner Diameter: 160mm
Oscillation Drive Method: Sinusoidal Vibration Mechanism by Conical Rotational Motion “Cone Drive”
Oscillation Drive Motor: Synchronous  Motor 25W AC
Oscillation Transmitting Method: Elastic Connection  by Leaf Spring
Frequency: 1.67Hz (100cpm)
Oscillation Angle: ±1°
Oscillation Angle Accuracy: 2±0.03°(Without Load)
Torque Detecting Method: Strain Gauge Type Load Cell
Torque Transmission  Method: Elastic Connection  by Leaf Spring
Testing Temperature Range: 50 to 230° C
Temperature Control Accuracy: Die Temperature: ±0.3° C at 190° C
Internal and External  Die Temperature Difference:  ±1.0° C at 190° C

Heat Control Method: Independent PID Control on four pieces  of Film Heaters  (Upper / Lower Die, Upper Outer / Lower Outer Die)
Temperature Sensor: Platinum Resistance  Sensor (Pt100) 4pcs
Maximum Testing  Time: 9999minutes
Shield Cover: Colored Acrylic  on Front and Sides  (Preventing external air and for Safety)
Safety Equipment : (1)   Two-hand Press Start Switch (Cylinder lifts only when both buttons are pressed simultaneously.), (2)   Overload Protection  (more than 22N・m), (3)   Overheat Protection  (Heater will be turned off at 240° C or higher.)
Communications: RS232C
Utilities: (1)   Power Source  AC100V/220V,  Single Phase,  Power Consumption less than 700VA, (2)   Dry Air 0.343 to 0.686MPa
Environmental Conditions: (1)   Temperature   5 to 40° C,  (2)   Humidity  35 to 80%RH (No Dew Condensation)
Dimensions  and Weight: Approx.333(W)×520(D)×780(H)mm, Approx.110kg
Standard Items: (1)   Equipment main unit: 1 set, (2)   Accessories 1set (Software, Special Tool, Minimum Consumable  Parts etc.)

Nội dung chi tiết phụ kiện sản phẩm đang được cập nhật...

Bình luận

Blow-Point Analyzer

Ueshima - Japan
12 tháng12 Months

Cable Abrasion Tester

Ueshima
12 tháng12 months
Xem tất cả 3 Sản phẩm liên quan

Statistical access

  • Đang online 77
  • Hôm nay 2271
  • Hôm qua 2200
  • Trong tuần 25871
  • Trong tháng 71053
  • Tổng cộng 1266475
COPYRIGHT BY CÔNG TY TNHH THIẾT BỊ SECOVINA
Design by 1Onnet