UNITED TRU-BLUE II Computerized Hardness Tester

Giá bán: Call

Mã sản phẩm: TB- II/10

Thương hiệu: United Calibration Corporation

Bảo hành: 12 months

UNITED TRU-BLUE II Computerized Hardness Tester

UNITED TRU-BLUE II Computerized Hardness Tester
. Vertical Capacity: 10"
. Throat Depth: 5.5"
. Easy to use menu selection for test setup.
. Regular Scales: A, B, C, D, E, F, G, H, K, L, M, P,
R, S, and V.
. Superficial Scales: 15N,30N, 45N, 15T, 30T,
45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y
and 45Y.
. Closed loop control of test cycle.
. Application of force measured via Load Cell.
. 5 preset test dwell times in accordance with
ASTM E-18.
. Statistical Summary including: Hardness
Scale, Average, Range, Hi/ Low, and Number of
Tests.
. Auto-Correction of hardness values when testing
cylindrically shaped parts.
. Auto-Conversion of hardness values to another
hardness scale and tensile strength in KSI or
MPa. Conversion data is based on ASTM E-140
and ASTM A-370 conversion charts.
. Audio/Visual alert for out of tolerance parts.
. PS/2 connector for data input via external
keyboard.
. RS-232 port for computer data collection.
. Parallel port for printer.
. Input data (20 characters) via external keyboard
for part identification. Data is printable.
. Bi-directional application of testing via Elevating
Unit or control panel.
. Audible alert for manual application of preload
force.. Adjustable Audible Alert.
. 4x20 Bright Vacuum Fluorescent Display.
. Front panel controls with Piezo-Electric switches.

. Auto self test and last test setup recall at startup.
. Removable Clamping Device for securing
irregular shaped or oversize parts to be tested.
. 20 bit analog to digital converters for force and
depth measurements.
. Co-Axial mounting of Force and Depth transducers.
. Manual, hex driver for indenters and power cord.
. Factory Certificate for Direct Verification of Load,
Depth, Hysteresis and Dwell Timing.
. Factory certificate for indirect verification of scales
available.
. Indenters, anvils and test blocks must be ordered
separately.
. 2-Year factory Warranty.
. CE Certified.

UNITED TRU-BLUE II Computerized Hardness Tester
. Vertical Capacity: 10"
. Throat Depth: 5.5"
. Easy to use menu selection for test setup.
. Regular Scales: A, B, C, D, E, F, G, H, K, L, M, P,
R, S, and V.
. Superficial Scales: 15N,30N, 45N, 15T, 30T,
45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y
and 45Y.
. Closed loop control of test cycle.
. Application of force measured via Load Cell.
. 5 preset test dwell times in accordance with
ASTM E-18.
. Statistical Summary including: Hardness
Scale, Average, Range, Hi/ Low, and Number of
Tests.
. Auto-Correction of hardness values when testing
cylindrically shaped parts.
. Auto-Conversion of hardness values to another
hardness scale and tensile strength in KSI or
MPa. Conversion data is based on ASTM E-140
and ASTM A-370 conversion charts.
. Audio/Visual alert for out of tolerance parts.
. PS/2 connector for data input via external
keyboard.
. RS-232 port for computer data collection.
. Parallel port for printer.
. Input data (20 characters) via external keyboard
for part identification. Data is printable.
. Bi-directional application of testing via Elevating
Unit or control panel.
. Audible alert for manual application of preload
force.. Adjustable Audible Alert.
. 4x20 Bright Vacuum Fluorescent Display.
. Front panel controls with Piezo-Electric switches.

. Auto self test and last test setup recall at startup.
. Removable Clamping Device for securing
irregular shaped or oversize parts to be tested.
. 20 bit analog to digital converters for force and
depth measurements.
. Co-Axial mounting of Force and Depth transducers.
. Manual, hex driver for indenters and power cord.
. Factory Certificate for Direct Verification of Load,
Depth, Hysteresis and Dwell Timing.
. Factory certificate for indirect verification of scales
available.
. Indenters, anvils and test blocks must be ordered
separately.
. 2-Year factory Warranty.
. CE Certified.

Nội dung chi tiết video sản phẩm đang được cập nhật...

Nội dung chi tiết download đang được cập nhật...

Nội dung chi tiết phụ kiện sản phẩm đang được cập nhật...

Bình luận

Hydraulic Tensile Testing Machine

United Calibration Corporation
12 tháng

United SFM Series Universal Testing Machine

United Calibration Corporation
12 tháng12 months
Xem tất cả 12 Sản phẩm liên quan

Statistical access

  • Đang online 35
  • Hôm nay 582
  • Hôm qua 616
  • Trong tuần 5579
  • Trong tháng 33946
  • Tổng cộng 247176
COPYRIGHT BY CÔNG TY TNHH SECOVINA
Design by 1Onnet