Vaccine Freeze Dryer

Giá bán: Call

Mã sản phẩm: EKS 50-3

Thương hiệu: Zirbus

Bảo hành: 12 months

Zirbus EKS 50-3LE Vaccine Freeze Dryer

Drying chamber:
Material : Stainless steel AISI 316 L
Chamber Dimensions : Ø1000 x 1800mm
Chamber door : Stainless steel with show window
Shelves, liquide temperature controlled:
To freeze and dry product inside the drying chamber.
Number  : 6+1 radiation shelve on top
Dimensions  : 600x950mm
Total shelf area : 3.42m2
Shelve distance : 80mm
Temperature range : -55…+60°C
Stoppering system for vials 
To close vials in the drying chamber under vacuum or gas atmosphere. 
Shelves can be moved up and down to close stoppers of vials. 
Ice condenser:
Capacity condenser : 50kg/24h, max. 60kg 
Final temperature : -75oC
Defrosting  : Hot gas 
Vacuum 
two-stage rotary pump with gas ballast valve, Edwards E2M40
Suction power : 40.0m³/h 
Final vacuum of pump   : 0.001mbar
Vacuum regulation:
Integrated magnetic valve for vacuum regulation
Instrumentation:
Vacuum sensors: Pirani Vacuum sensor  range 0.001...1000 mbar for chamber     
Temperature sensors  : 3 product probes 
probe for shelf temperation 
condenser temperature
Control:
Control system  : Mitsubishi FXN 
Operation / visualization : 7” coloured touchpanel, Drytec “M”
Rrying programmes : 20pcs. 
Programme structure  : freezing, 10 steps with ramps, Primary drying 10 steps, Secondary drying 10 steps
Dimensions, weights:
Width: 1500mm 
Length : 1900mm 
Height : 1950mm 
Weight : approx. 1000kg 
Connection : 400V,3ph., 50Hz
Watercooled compressor: 
Instead of air cooled version. 
Cooling water required, max. temperature +28°C 
Max. water consumption aprox. 1.5 m³/h
Product trays: 
Material stainless steel, 24pce. 
Dimensions: 300mm x 475mm x 30mm 
One set with 24 trays, 4 on each shelve. 
One tray has two parts, loading frame and support tray 
Front panel 
Stainless steel front panel for wall/cleanroom integration. 
Maschine parts as compressor, vacuum pump will be in the 
dirty area. Loading of product from clean front side. 
Visualisation Software 
Zirbus “drycontrol”
PC based visualisation and documentation system, SCADA 
Operation can be done by PC. 
Based software is by Windows Access. 
Complete unit with PC, 20” TFT monitore, coloured laser printer
Windows 7, 32bit required.

 

Drying chamber:
Material : Stainless steel AISI 316 L
Chamber Dimensions : Ø1000 x 1800mm
Chamber door : Stainless steel with show window
Shelves, liquide temperature controlled:
To freeze and dry product inside the drying chamber.
Number  : 6+1 radiation shelve on top
Dimensions  : 600x950mm
Total shelf area : 3.42m2
Shelve distance : 80mm
Temperature range : -55…+60°C
Stoppering system for vials 
To close vials in the drying chamber under vacuum or gas atmosphere. 
Shelves can be moved up and down to close stoppers of vials. 
Ice condenser:
Capacity condenser : 50kg/24h, max. 60kg 
Final temperature : -75oC
Defrosting  : Hot gas 
Vacuum 
two-stage rotary pump with gas ballast valve, Edwards E2M40
Suction power : 40.0m³/h 
Final vacuum of pump   : 0.001mbar
Vacuum regulation:
Integrated magnetic valve for vacuum regulation
Instrumentation:
Vacuum sensors: Pirani Vacuum sensor  range 0.001...1000 mbar for chamber     
Temperature sensors  : 3 product probes 
probe for shelf temperation 
condenser temperature
Control:
Control system  : Mitsubishi FXN 
Operation / visualization : 7” coloured touchpanel, Drytec “M”
Rrying programmes : 20pcs. 
Programme structure  : freezing, 10 steps with ramps, Primary drying 10 steps, Secondary drying 10 steps
Dimensions, weights:
Width: 1500mm 
Length : 1900mm 
Height : 1950mm 
Weight : approx. 1000kg 
Connection : 400V,3ph., 50Hz
Watercooled compressor: 
Instead of air cooled version. 
Cooling water required, max. temperature +28°C 
Max. water consumption aprox. 1.5 m³/h
Product trays: 
Material stainless steel, 24pce. 
Dimensions: 300mm x 475mm x 30mm 
One set with 24 trays, 4 on each shelve. 
One tray has two parts, loading frame and support tray 
Front panel 
Stainless steel front panel for wall/cleanroom integration. 
Maschine parts as compressor, vacuum pump will be in the 
dirty area. Loading of product from clean front side. 
Visualisation Software 
Zirbus “drycontrol”
PC based visualisation and documentation system, SCADA 
Operation can be done by PC. 
Based software is by Windows Access. 
Complete unit with PC, 20” TFT monitore, coloured laser printer
Windows 7, 32bit required.

 

Nội dung chi tiết video sản phẩm đang được cập nhật...

Nội dung chi tiết download đang được cập nhật...

Nội dung chi tiết phụ kiện sản phẩm đang được cập nhật...

Bình luận

Lab Spray Dryer BII-S151

BII
12 tháng12 months

VaCo 5 Freeze Dryer

Zirbus
12 tháng12 months
Xem tất cả 9 Sản phẩm liên quan

Statistical access

  • Đang online 33
  • Hôm nay 341
  • Hôm qua 700
  • Trong tuần 3099
  • Trong tháng 31137
  • Tổng cộng 351056
COPYRIGHT BY CÔNG TY TNHH SECOVINA
Design by 1Onnet